Jacket production Process - Step by Step

Jacket Production: In the field of apparel, jacket or blazer production known as  most unique product due to its construction process/ cost factor/formal look as well for its special machine requirement while making it.

Jacket is a combination of outer and inner layer by having shape fixation material inside to get proper formal look 

In this article we will go through step wise process of Jacket production to know the advantage 

Step-1 , Pattern:

Mostly other garments req 2 to 3 set of pattern plotter as per raw material used in styling but jacket have deferent case as types of raw material used in jacket is maximum compare to any other apparel product.

For jacket making below list of pattern(plotter) req to cut the all raw material which utilize in 

blazer manufacturing.

Body Fabric Pattern.

contrast fabric pattern

body lining pattern 

contrast lining pattern

woven fusing pattern

non woven fusing pattern
Reinforcement fusing pattern

Body canvas pattern

yoke canvas pattern

Body felt pattern

Sleeve head pattern

collar felt pattern

Some other ready pattern also going to use as per style requirements to give  clean finish .

Step-2

After Pattern Finalization of all raw material, second step is to make plotter for bulk cutting.

Plotter finalization(lay Length)  depends upon size breakup against order qty so pattern sizes can be adjust as per size wise order qty in plotter.

Step -3 

Layering is the process which starts after plotter length finalization. All above given material have to be layered for cutting.

Jacket production process is complicated due to such lengthy process. Every material have to cut separately and they having there separate importance, any mistake anywhere result 

quality issue in final product.

No of layers depend upon order quantity break up as well thickness of material.

layering can be done manually or by auto layer machine.

Step -4

Cutting is the next step after layering of all raw material which used in blazer. Cutting process done manual as well with specialized auto cutter.

Step -5 

Panel numbering is the next process after cutting to control the shading issue within garments by using sticker along with lot no(Fabric roll wise/shade wise lot no.) on each panel.

Numbering system helps when the assembling process starts so each lot no can be assemble together.

Step-6 

Blazer manufacturing require fusing on several panel. Fusing of those panels done after stickering(Numbering)  because if fusing done before Stickering then the panel mismatch probability of garments will be higher as its done on assumption basis.

Step -7

Shorting is the process also called as bundling. Its done on the basis of fabric roll. On the time of layering all manufacturers follow one shade one bundle policies. It might be one fabric roll layer = one bundle. No of pcs in bundle depend upon fabric roll length. 

 

Step -8

Marking and line loading done when the bundling process get completed. Marking process having there own importance in blazer manufacturing. 

Marking done specially for dart as well for pocket placement. Marking should be done as per design requirement to achieve proper placement of any operation or part as per define measurement. 

Step-9 

Line Loading is the next process after marking on panels. 

Jacket line loading can be categories into 4 divisions as per line setting. Jacket have mostly 5 separate manufacturing divisions to complete one stitching. Below is the category wise manufacturing divisions.

a) Body Fabric sewing section: In this section all body fabric parts get stitched together by adding pockets, darts , shoulder pget added in this ad fixation as well any other specific requirement of design.

b) Lining sewing section: Lining is the inner layer of blazer having soft feel and its give comfort upon wearing. In this sewing section all lining parts get assembled to form the inner shape construction. Inside pocket and piping or other construction depends upon design requirement. 

c) Sleeve Sewing section: Jacket sleeve made by using outer layer of body fab and inner layer with lining material. Decorative buttons and keyhole on sleeve get added in this section.

d) Canvas Sewing section: To give proper formal shape to jacket its necessary to use Chest canvas , felt, yoke canvas and sleeve head canvas along with sleeve head felt. These all materials used in-between  both the layers(Body fab and lining) Attached with body fab with basting stitch. 

Before sewing these materials in product. Theses materials get assemble together as per there shape and materials( chest canvas sew along with yoke canvas and chest felt where as sleeve canvas stitched with sleeve head felt).

e) Assembly section: Once all parts sewing get completed(Body, lining , sleeve and canvas). These all parts get assembled in one sewing section which know as assembly section. 

 In this section Outer layer get stitched with lining layer and then sleeve get attached with these both in such way that stitch line should not be visible out side so all sewing operation done from inside only.

Lots of special sewing machine req to assemble a jacket. Shoulder pad attachment and  Button hole also made in this section only.

Step -10

After jacket sewing done, Finishing process get started, It includes - Thread Cutting, Pressing, Buttoning, Checking, tagging . 

* Stitched jacket have less thread to cut as there sewing operation done inside and most of thread got trimmed in stitching line only.

* For jacket Pressing there is lots of special pressing equipment require to give proper body shape to a jacket. for example  

Body pressing machine: This equipment have body shade to give same look to a jacket while pressing.

Like that every parts pressing machine is available in market to give proper shape to each part of jacket like- Lining pressing, Sleeve pressing, Lapel pressing , Sleeve neeping,  shoulder pressing etc.

* Buttoning done once pressing got completed  because if button get attached previous to press might leave shining on garment while pressing.

* Section wise checking is the process which got followed in sewing line. But final checking done after pressing to see the actual impact of shape and other aspects of the product.

* If there is any tag or label(Label on sleeve) which require to added in garment get done in finishing section.

* Step -11

Packing process is the last part of jacket or apparel manufacturing. In this section garment get embellished with price tag , any other decorative tag or lapel pin. After tagging its get hanged on brand hanger if any and then polybag put upon it as well suit cover get added if req. 

Now the jacket is ready to dispatch either by hanging mode or in carton packing mode. Hanging mode is recommendable for formal category.

Hope this article helps you in the way you were looking for it. 

 

Jacket or Suit Fusing Guidelines

Jacket Or Suit Fusing: 

When we are talking about jacket manufacturing then we have to go through internal material requirement of a jacket where fusing plays a significant role. Good quality jackets or suit need to be fused on several parts while its get sewn to give good drape upon wearing. In this blog you will find out why fusing require on several parts of jacket or suit and how we can use interlinings to make a quality product.

Here we go Through part wise fusing guidelines of a quality product jacket or suit:-

Front Panel fusing: Three types of fusing commonly used to make a jacket or suit. After detailing of all these three fusing will see where have to use these fusing in front panel and side panel as well on sleeve.

1. Woven fusing:- Also known as Body net fusing. Mostly used on front panel of jacket. For Jacket and suits polyester woven fusing is preferred to use with GSM Varies  between  40 to 90 as per fabric material and there thickness. Below are the benefits of woven fusing on garments.

* It helps to give curve and shape to garments.

* Enhance wrinkle resistance and elasticity of clothes.

* It Improves garment drape and enhance the stereo feeling.

* Prevents garment distortion and ensure to achieve an anticipative  design effect.

* Enhance the sense of thick, rich and warmness of clothes.

* It improves sewing efficiency and so on.

Note: Body net fusing color selection should be as per shell fabric. If fabric is lighter color then fusing color should be lighter or else darker color fusing will visible out side. Same applied for darker shell fabric also - if shell fabric is darker color then the fusing color selection should be also dark color only.

2. Non woven fusing: Also known as micro dot fusing. Uses of micro dot fusing on parts depends upon fabric quality and garments design. 100% polyester material prefer for making jacket and suits. GSM of the fusing varies between 15 to 50 as per fabric quality. See below specifications of micro dot fusing on garments.

* Enhance shrink resistance of shell fabric.

* Increase tear capability of shell fabric.

* It gives soft feel to fabric.

Note: Fusing color selection should be as per shell fabric color. Lighter color fusing for light color shell and dark color fusing for darker color shell fabric.

3. Reinforcement Fusing:- Also Non as NR Fusing. 100% Polyester material with  thread inside which helps to control fabric stretch-ability to give proper shape to the garment without any shape distortion.

Uses of These three fusing on front panel and side panel of jacket or suit:

Look at the below picture of fussed front panel of jacket with these above all three fusing. Will go through the detailing of uses after seeing the image.

 * Darker area indicates uses of woven fusing. Its mostly used on front part to give harder oval look  to jacket which is the first requirement of it.

* Non woven fusing used on shoulder area after using woven fusing as shoulder shape need to be more stuff while making jacket or suits. Its also used on other parts like side and arm hole separately to give shapes on those area's.

* On the above image we can able to see that NR fusing mostly got used on side seam area's as well on corner's to hold the fabric drop if upon stitching even the if the fabric wait is more.

Note:- Canvas is also playing master roll in jacket or suit manufacturing. Will go through canvas detailing in my next blog.